Posted: Wed Jun 20, 2007 4:25 pm Post subject: Lots to do!!
Looks like i am going to be busy over the summer! Have just bought my first Vario body to build. Am doing a Bell 412 in the RAF Defence Helicopter Flying School scheme (the a/c i did my first solo in) using extreme mechanics, Rossi 11.5cc engine and a helitronix mixer for the 4 blade head. Am excited and nervous!! Along with doing a FK Jet Ranger for my shuttle and a Bell 222 for my other shuttle it looks as if i may be limited in the number of time i get to venture out to the field! Any tips/ help with any of my current projects would be greatly appreciated.
Posted: Mon Jun 25, 2007 12:02 pm Post subject: scale heads etc....
Any tips or info on Setting up a multi blade head would be useful . I am going to be using 4 servo 90 degree ccpm with 2 csm 180 gyros and a helitronix mixer. Have heard some people say that using 4 servos may cause servo 'jitter', hence the reason some people go for using only 3 servos. Not sure if this is going to be a problem?
The other problem i have had is with the shuttle in the jet ranger body. I have found that i couldn't get the top cowling on at all. i had to remove the wooden runners that were supplied and use a piece of 1/32 to mount the mechanics on instead. I also had to sand big cunks from the front top of the main frames. I then had to heat the body and cowl to get it to piece together. Even then it is a really tight fit, Cant understand why this has happened especially as the FK fuses are designed around the shuttle.? I had a couple of other guys look at it and they couldn't figure it out either?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You can attach files in this forum You can download files in this forum
Forum FAQ
Search
Usergroups
Profile
Log in to check your private messages
Log in
Have just bought my first Vario body to build. Am doing a Bell 412 in the RAF Defence Helicopter Flying School scheme (the a/c i did my first solo in) 
using extreme mechanics, Rossi 11.5cc engine and a helitronix mixer for the 4 blade head. Am excited and nervous!! 
Along with doing a FK Jet Ranger for my shuttle and a Bell 222 for my other shuttle it looks as if i may be limited in the number of time i get to venture out to the field! 
Any tips/ help with any of my current projects would be greatly appreciated. 
. I am going to be using 4 servo 90 degree ccpm with 2 csm 180 gyros and a helitronix mixer. Have heard some people say that using 4 servos may cause servo 'jitter', hence the reason some people go for using only 3 servos. Not sure if this is going to be a problem?