Search found 51 matches

I would have thought so Stephen.

I went the whole hog and removed all the cut outs marked.

http://www.qservices.biz/downloads/Titan/IMG_1527.JPG

http://www.qservices.biz/downloads/Titan/IMG_1 ...

Looks nice Stephen. I notice you have not cut out the vent holes. Do you not find the lipo getting hotter than usual? Mind you it is winter Laughing

I had a TRex 450XL, didn't get on to well with it, tight ball links, wallowy, always out of track. I eventually upgraded to the metal head and HDE carbon frame setup. Didn't really improve much.

I ...

Thanks Waldo,

A Hirobo won't fit the fuz unfortunately.

Thanks for the offer though Smile

Unfortunately a 30 would not be big enough, needs to be at least a 60 size.

Thanks for the info though Smile

Does anyone have any Raptor 60 or 90 mechanics knocking about that they are not wanting? I have a project on the go to electrify my Airwolf and just needs some suitable mechanics.

If you have, let ...

Cracking scenery Barney, even with that drunk wasp in front of you Laughing

Yes that's a reasonable idea Alex if you need more than 7 channels.

I did a lot of digging and asking questions and eventually found out that JR supply the hardware and software and Spektrum suppl ...

I bought a DX7 when they came out as well and now no longer have any 35mhz stuff Cool

Far simpler and safer not having to worry about frequencies etc Very Happy

I agree with Barney, the top end sets have b ...

Have you tried it again with the adjusted pitch range? Always looks smart seeing a heli without a fly bar Very Happy

I'll come Barney providing the date doesn't clash with anything else. Hopefully Mario won't get to film my helis demise again Laughing

I wouldn't be too disheartened about lack of replies on forums, ...

Hi Folks,

I have booked the Garioch Sports Centre, Inverurie, Aberdeenshire on Sunday 25th March 2007 for a couple of hours between 2pm and 4pm. If you are in the area, why not come along for a bit ...

Problem solved Very Happy

It transpires that there was a sub trim still remaining in the setup on the gasser and there was one click of rudder trim on the TRex. Both had gone un noticed during the setup!

Yes it does help, thank you a very detailed response Very Happy

I wonder if anyone can shed any light on an interesting issue that I am having with both my 401 gyro's.

I have setup the gyros in both my TRex and X-Cell gasser as per the manual. The neutral was a ...